Head Mounting Flat Plate Bracket for Waterproof Electric Linear Actuator J (Model 0043078)

Head Mounting Flat Plate Bracket for Waterproof Electric Linear Actuator J (Model 0043078)Each linear actuator would require two mounting brackets, one to fix the head of linear actuator and another to fix the bottom of linear actuator. This flat plate bracket is used to mount vertically on the head of the waterproof linear actuator J . Includes a flat plate bracket and a M8 screw. Aluminum material. Size: 55 x 55 x 6 mm (2. 2 x 2. 2 x 0. 24 inches) Diameter of the four outer mounting holes: 6. 5mm [0. 256 in] Diameter of the middle

Different Speeds and Corresponding Maximum Thrust No-load Speed Full load Speed Maximum Thrust Self-locking Force 20mm/s 15mm/s 3000 N / 300 kg / 670 lbs 3500 N / 350 kg / 790 lbs 50mm/s 38mm/s 1000 N / 100 kg / 200 lbs 1500 N / 150 kg / 340 lbs Note:

Product Specifications Parameter Value Model 0041641 Working Voltage DC 6V

resulting in a retraction length of 1230 mm

Stroke and Length (Model 0041504-2) Parameter Value Stroke 300mm Retraction Length 435mm (center distance between two mounting holes when the linear actuator is fully retracted) Extension Length 735mm (center distance between two mounting holes when the linear actuator is fully extended) The linear actuator has two built-in limit switches

garage doors

and connect the negative pole of DC power supply to terminal <->

it means that the delay time is seconds

all linear actuators extend outward at the same time

2 x Fixing Brackets J

3) You can continue to store the other two stroke positions into the button 2 and 3 by following the operation above

You can control linear actuators with our hand tools

resulting in an effective stroke of 575 mm