12V 24V Industrial Linear Actuator B One-Control-Three Synchronous Control Kit (Model 0043061)

12V 24V Industrial Linear Actuator B One-Control-Three Synchronous Control Kit (Model 0043061)This one control three synchronous kit is used for industrial electric linear actuators to synchronize their operation. It contains three Type B industrial actuators with built in Hall effect sensors, one synchronous controller, one touch control handle, and a CF 2 remote control. Note: All linear actuators must be connected to the synchronous controller for the system to function properly. The remote control of the synchronous controller has two

you can also choose to retain the original standard retraction length of 900 mm

we will install Hall effect sensors in the linear actuators during production for you

Reset operation: Press and hold the <R> button of the control handle or press and hold the <Reset> button on the controller

CG-3 (500 Meter / 1500 feet range) or CB-3-2 (1000 Meter / 3000 feet range)

Click to Download 3D CAD Model File in STEP format 50MM [2 in] Linear Actuator

DC 12V or DC 24V (24V most commonly used) Stroke 17

DC 24V (24V most commonly used) Stroke 40 inches / 1000 mm Optional Speed (No-load) 3

and connect the negative pole of DC power supply to the terminal <-> of the controller

Different Speeds and Corresponding Maximum Thrust No-load Speed Full load Speed Maximum Thrust Self-locking Force 5mm/s 3

and connect the negative pole of DC power supply to terminal <-> of the receiver

Install the flat base to the bottom of linear actuator A and tighten the three screws with a hexagonal wrench

three or four electric actuators