8 In 200MM Adjustable Stroke Industrial Linear Actuator with NC Magnetic Reed Switch (Model 0041513-4)

8 In 200MM Adjustable Stroke Industrial Linear Actuator with NC Magnetic Reed Switch (Model 0041513-4)This is an adjustable stroke industrial linear actuator with a standard stroke of 200mm. It is equipped with two external normally closed magnetic switches that can slide freely. By adjusting the positions of these two normally closed magnetic switches, the linear actuator can be controlled to work within the set stroke length. For example, for a linear actuator with a stroke of 200mm, you can set it to move within a stroke range of 50mm to 180mm. Key

two terminals <NO> and <COM> of <OUT3> are connected

Press the button 3 on the APP

Release the right button ▲: Motor 2 or linear actuator 2 stops

Standby current: 4uA

then you can use manual switches to control the motor

you can also choose to retain the original standard retraction length of 275 mm

Connector: DC 5

12 Selectable Working Modes: Self-locking

or 100W for 24VDC

This one-control-three synchronous kit is used for industrial electric linear actuators to synchronize their operation

The deviation of the joystick is greater

Press the button ▼ on the receiver: terminal “Output” outputs DC power