36 In 900MM Adjustable Stroke Industrial Linear Actuator with NC Magnetic Reed Switch (Model 0041535-4)

36 In 900MM Adjustable Stroke Industrial Linear Actuator with NC Magnetic Reed Switch (Model 0041535-4)This is an adjustable stroke industrial linear actuator with a standard stroke of 900mm. It is equipped with two external normally closed magnetic switches that can slide freely. By adjusting the positions of these two normally closed magnetic switches, the linear actuator can be controlled to work within the set stroke length. For example, for a linear actuator with a stroke of 900mm, you can set it to move within a stroke range of 50mm to 860mm. Key

two four-channel synchronous controllers (one master controller and one slave controller)

DC 24V (24V most commonly used) Stroke 48 inches / 1200 mm Optional Speed (No-load) 3

Russian and other languages

such as 750 mm

up to 6561 codes

Press the button ▼ on the transmitter: terminal “Output” outputs DC power

) IP Rating IP67 (Ideal for use outdoors or in the rain

If you connect two DC motors to this receiver

2) Press the DOWN button of the manual switch

Maximum continuous working current: 5A

This linear actuator is also compatible with two flat mounting brackets: Head Fixed Mount Flat Bracket (Model 0043073) and Bottom Fixed Mount Flat Bracket (Model 0043074)

a specified retraction length of 545 mm is less than the standard retraction length of the ordered actuator (580 mm)