12V 5600mAh Lithium Battery Pack With Rechargeable Function (Model 0010203)

12V 5600mAh Lithium Battery Pack With Rechargeable Function (Model 0010203)Product parameters: Model: 0010203 Rated Voltage: 12V DC Rated Capacity: 5600mAh Cell Type: 18650 Cell Number: 6 Discharge Cut off Voltage: 9V Charge Cut off Voltage: 12. 6V Maximum continuous working current: 5A (DC 5. 5*2. 1mm Plug) or 12A (Needs to be replaced with an XT60 type output plug.) Suitable for electrical appliances not exceeding 110W. Cycle Life: More than 1000 times 48 hours aging test. Connector: DC 5. 5*2. 1mm Male Plug and Female

you can connect limit switches or sensors (normally open type) to terminals S1

DC 36V or DC 48V (24V most commonly used) Stroke 14 inches / 350 mm Optional Speed (No-load) 5±1mm/s

high-power DC motor

the actual working distance may not reach this maximum distance

shielded wire set inside

from 10 mm to 2000 mm

Stroke and Length (Model 0041547) Parameter Value Stroke 800mm Retraction Length 1100mm (center distance between two mounting holes when the linear actuator is fully retracted) Extension Length 1900mm (center distance between two mounting holes when the linear actuator is fully extended) The linear actuator has two built-in limit switches

Delay function: The device will automatically turn off when the set time reached

3) Setting Interlocking mode: When the receiver is in the working mode switching state

Control DC motors of rolling

or 12±1VDC (model S2UW-DC12)

1) Press the learning button in the receiver for 1-2 seconds