Two-Way Self-Reset Cross Rocker Switch For Linear Actuator (Model 0043091)

Two-Way Self-Reset Cross Rocker Switch For Linear Actuator (Model 0043091)Description: Cross rocker switch for motor CW CCW rotation. Suitable for controlling the forward and reverse rotation of DC motors. Suitable for controlling the extension and retraction of DC linear actuators. Operating voltage range: DC 3V ~ 48V Maximum Load current: 30A at 12V 24V Control method: Rocker Switch Type: 2 Position, Self reset Main Function: Front (Forward) Center (Stop) Back (Reverse) With a 50CM 0. 75 square millimeters four core cable

resulting in a retraction length of 955 mm

That means when the restrictive switch “X1” is connected

you can press the stop button or any button of the remote control to stop three linear actuators at the same time

This is a micro-industrial linear actuator with an adjustable stroke and a standard stroke of 300 mm

Momentary Mode: Connect JP2

Diameter of the middle mounting hole: 8

When you set the receiver in Interlocking mode

on-water or on-board equipment

5mm/s 5500 N / 550 kg / 1200 lbs 6000 N / 600 kg / 1300 lbs 7mm/s 5mm/s 3500 N / 350 kg / 770 lbs 3500 N / 350 kg / 770 lbs 9mm/s 7mm/s 3000 N / 300 kg / 660 lbs 3000 N / 300 kg / 660 lbs 14mm/s 10mm/s 2000 N / 200 kg / 450 lbs 1000 N / 100 kg / 200 lbs 18mm/s 13mm/s 1500 N / 150 kg / 330 lbs 800 N / 80 kg / 180 lbs 28mm/s 20mm/s 1200 N / 120 kg / 260 lbs 500 N / 50 kg / 110 lbs 38mm/s 26mm/s 1000 N / 100 kg / 200 lbs 300 N / 30 kg / 60 lbs Note:

electric beds

of manual buttons in :

Model: S4PUW-DC-ANT3