M5 - M20 ADJUSTABLE STEEL TAP WRENCH

M5 - M20 ADJUSTABLE STEEL TAP WRENCHBAER Adjustable Tap Wrench Steel NO. 3 M 5 20 7 32 3 4 G (BSP) 1 8 1 2 The adjustable steel tap wrench is an operating tool made of tool steel for taps, with which internal thread can be cut by hand. An all steel tap wrench is ideal when a larger diameter of the threaded hole and thus a higher torque is required. The reason for this is that the higher quality of the cast steel also allows higher forces to be absorbed. The outstanding quality of the

587 Dimension UNC 3/8 x 16

a finished thread with oversize can be cut in one operation as a holding thread for wire thread inserts of dimension M 16 x 2

Angle connection

They are drilled out and a new STI thread (screw thread insert) is cut for the wire thread insert

for manual use

468 '' P (depth) The thread insert must sit 1/4 - 1/2 turns below the surface B (thread depth with chamfer) 0

in metal box

reduce wear and thus increase the tool life time

Height H 11 mm Diameter 3/8 Nominal diameter in inches 0

5423 16Mo5 1

5 mm Dimension 19

20 x B7209-15: BaerCoil thread inserts M 6 x 1