MF 52 x 1.5 Baer HSSG Hand Tap Taper (No. 1)

MF 52 x 1.5 Baer HSSG Hand Tap Taper (No. 1)BAER HSSG Hand Tap Taper (No. 1) MF 52 x 1. 5 The hand tap taper tap (No. 1) enables you to pre cut a thread. The advantage of pre cutting a thread is that the cutting forces on the subsequent finishing tap (No. 3) are reduced. The taper tap (No. 1) is marked with a ring and removes approx. 65 percent of the thread profile. Because no complete thread profile is cut, the thread is not yet usable. Only when the finishing tap (No. 3) completes the thread

compressed air or similar after each thread cutting

35 mm P (depth) The thread insert must sit 1/4 - 1/2 turns below the surface B (thread depth with chamfer) 16

01 G-CuSn10Zn

27 Dimension PG 7 x 20

1 x EBW18: BaerCoil Installation tool M 18 x 2

With BaerFix® thread inserts you need fewer connecting parts

Suitable for steels

BAER Round Cutting Die UNF 1/2 x 20 - HSS

Product group Wire thread inserts Product type BaerCoil wire thread inserts Thread standard G (BSP): British Standard Pipe Thread according to DIN ISO 228 - Cylindrical pipe thread Direction Right Type free running Tensile strength at room temperature >1400 N/mm² Material Stainless Steel V2A (AISI 304

With this BaerCoil® thread repair set it is possible to repair through hole threads and blind hole threads in MF 20 x 1

Product group Operating tools Product type Square drive extension Standard DIN 377 Material Steel

doors and furniture