BPM7-1616-B

BPM7-1616-BBottom Plates that actually support the liner! Our Bottom Plates fully support our BEST FLEX liners, OR our RIGID Liners, above the fireplace box. Use a SOLID Plate, or our MESH style plate to satisfy your application. CLAMPS ARE STANDARD ON ALL BOTTOM PLATES 4 inch DUAL PURPOSE COLLAR TO SUPPORT BOTH RIGID & BEST FLEX LINERS

emergencies or during the application of an over-roof of any kind

HeatShield PriorFire Formula 51 can be parged

HeatShield Adhesion Promoter is a liquid additive that is added to HeatShield Cerfractory Flue sealant or HeatShield Cerfractory Foam upon mixing to further promote adhesion or bonding to flue tiles and masonry surfaces

The ceramic face will not fade and it has a strong magnet which will hold it in place on the flue pipe

REQUIRED FOR PASSING THROUGH A FLOOR

Because the interior surfaces of masonry chimneys and fireplaces are often difficult to clean and prep

The bottom end goes OVER 6 inch

They have a 1 inch standoff for air flow which gives that little extra heat protection

Apply up to 1/4 inch maximum thickness

Properly installed

CrownTite is a proprietary blend of latex acrylics formulated for use over most exterior masonry

Manufactured with Stainless Steel on the inside with 1 inch clearance to combustibles