20 Inch 500MM Waterproof Linear Actuator IP67 / Low Noise Linear Actuator (Model 0041942)

20 Inch 500MM Waterproof Linear Actuator IP67 / Low Noise Linear Actuator (Model 0041942)This is an IP67 waterproof electric linear actuator with a stroke of 500mm and a maximum thrust of 3500N (350 kg 780 lbs). The linear actuator is equipped with a waterproof breather valve, which allows air to freely flow in and out of the cylinder. When the linear actuator is running, a pressure difference will be generated inside and outside the cylinder, and air will flow in and out of the cylinder through the breather valve to ensure that the

For 2 Linear Actuator C / F with Hall effect sensors)

Weight: 75g

two relays are connected or disconnected alternately

Press the button ▼ on the transmitter: terminal “Output” outputs DC power

a specified retraction length of 655 mm is less than the standard retraction length of the ordered actuator (685 mm)

if another limit switch is triggered

When the linear actuator is retracted to the end position

The receiver has two buttons

Stroke and Length (Model 0041520-1) Parameter Value Stroke 700mm Retraction Length 875mm (center distance between two mounting holes when the linear actuator is fully retracted) Extension Length 1575mm (center distance between two mounting holes when the linear actuator is fully extended) The linear actuator has two built-in limit switches

can be used for 12 months)Quiescent Current: 5μAWorking Current: 65mA (when the transmitter is transmitting the signal)

it will send out a buzzing sound to inform you that the receiver has been successfully triggered

1 Connect the positive pole of DC power supply to terminal <VCC> and connect the negative pole of DC power supply to terminal <GND>