Electric Linear Actuator C Bottom Fixed Mounting Square Plate Bracket (Model 0043076)

Electric Linear Actuator C Bottom Fixed Mounting Square Plate Bracket (Model 0043076)Each linear actuator would require two mounting brackets, one to fix the head of linear actuator and another to fix the bottom of linear actuator. This flat plate bracket is used to mount vertically on the bottom of the linear actuator C . Includes a flat plate bracket and six black M5 screws. Iron material. Size: 152 x 115 x 10 mm (6. 0 x 4. 5 x 0. 4 inches) Diameter of the four outer mounting holes: 10. 5mm [0. 413 in] Diameter of the six inner

3) Connect the positive pole of DC power supply to the terminal <+> of the controller

a stroke of 50mm

2) In Momentary mode:

you can also choose to retain the original standard retraction length of 450 mm

Using original filter capacitors and field effect power tubes

you can press the button <STOP> on the transmitter to stop the cycle working

you can also choose to retain the original standard retraction length of 880 mm

border-bottom: 1px solid #ccc

} This is a high-speed linear actuator with a 400mm stroke

1) When three linear actuators extend outward

1) Press the learning button in the receiver for 1-2 seconds

Operating voltage range: DC 10V~60V