Quiet & Waterproof Linear Actuator One-Control-Six Synchronous Control Kit (Model 0043105)

Quiet & Waterproof Linear Actuator One-Control-Six Synchronous Control Kit (Model 0043105)This one control six synchronous control kit synchronizes the movement of quiet and waterproof linear actuators. It includes six Type J waterproof actuators with built in Hall effect sensors, two synchronous controllers (one four channel master controller and one two channel slave controller), a touch control handle, and a CF 2 remote control. Note: All linear actuators must be connected to the synchronous controller for the system to function

The actuator has a 900mm stroke

Suitable for electrical appliances not exceeding 100W

Parameters:Model: 0021063 (CCW-1)Channel / Button: 1Button Symbol: No SymbolOperating Voltage: 9V (1 x 6F22-9V battery

you can also choose to retain the original standard retraction length of 500 mm

so linear actuator or motor's maximum starting current cannot exceed 40A Wire Range for the Terminals 22-12 AWG Two Selectable Control Modes Interlocking mode or Momentary mode Operating Temperature -20°C ~ +70°C Case Size 115 x 95 x 40 mm (4

Matching Transmitters This receiver can work with different transmitters

Retraction Length: 885 mm (center distance between two mounting holes when the linear actuator is fully retracted)

a specified retraction length of 1050 mm is less than the standard retraction length of the ordered actuator (1080 mm)

3) Terminal 4 of both the UP and DOWN buttons to <GND> terminal

we will flatten the mounting hole part on the original base of linear actuator B by using the milling machine

: 0021011 (CP-2)

Restrictive function: