Shapton 2000 grit (7.35 micron) GlassStone

Shapton 2000 grit (7.35 micron) GlassStoneThis 2000 grit (7. 35 micron) GlassStone (50302) a medium grit, so still cuts quickly, but leaves a much finer finish than the 1000 grit or 500 grit stones. The Shapton GlassStone HR series of ceramic sharpening stones are the most advanced series of stones that Shapton makes they are designed to cut both modern tool steels and high carbon steel very quickly, but wear very slowly, so don't need to be flattened as often as most waterstones. The stones

02mm per meter or 0

Veritas and Lie Nielsen Block Planes (most around 1/8"/3

smooth cutting riffler

When fastened together

It can be used to flatten synthetic and natural waterstones

Because of this they are not certified to DIN 875/0 accuracy

A very good 250 mm machine cut cabinet rasp for a great price

half round

You can put a cork rubber liner/ leather (or equivalent) soft jaw on the front and/or back jaw  for better work holding when dealing with timber that is not quite parallel

and with both right and left orientations

However the edges of the titanium on these squares are laser cut rather than ground as this material is very difficult to grind - this means that although the angle is very accurate on these squares

2 mm (1/8") +0