10/32" UNF BAER TAP SET - 150301009 (P96)

10/32" UNF BAER TAP SET - 150301009 (P96)BAER HSSG Hand Tap Set (2pcs.) UNF No. 10 x 32 The hand tap set consists of two taps and allows you to cut a finished thread with significantly reduced risk of breakage. The advantage of two piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with a ring) removes 65 per cent of the thread profile and the and brings the thread into shape. The finishing tap (No. 3) has no ring marking and cuts the

Strong wire handle

Then screw the thread insert into the receiving thread under slight pressure until it is 1/4 - 1/2 turn below the surface

type: "free running"

BSC thread inserts: BSC 7/16 x 26

Please note that the above cutting speeds are indicative and must be adjusted depending on lubrication and actuation

25 & M 10 x 1

23m² per tin

Square = 7

21 mm Height H 16 mm Wrench size S 50 mm Dimension Diameter D UNF 1" x 12 Diameter 1"

1 x B3009-1: BaerCoil HSSG single-cut tap M 6 x 1

BaerCoil Thread Repair Kit BSF 3/8 x 20

The thread can be cut into a pre-drilled core hole