BAER HSSG Hand Tap Set (2pcs.) G (BSP) 1.1/4 x 11

BAER HSSG Hand Tap Set (2pcs.) G (BSP) 1.1/4 x 11BAER HSSG Hand Tap Set (2pcs.) G (BSP) 1. 1 4 x 11 The hand tap set consists of two taps and allows you to cut a finished thread with significantly reduced risk of breakage. The advantage of two piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with a ring) removes 65 per cent of the thread profile and the and brings the thread into shape. The finishing tap (No. 3) has no ring marking and cuts

5 D T (Length when installed) 49

3) enables you to cut a finished thread

Diameter 11 Pitch 1

954 Dimension UNC 1/2 x 13 Square 7 mm

chip is mainly absorbed by the flutes and is not removed during cutting

0 D2 12 mm L1 70 mm L2 22 mm Diameter 17 Square 9 mm

On the outer casing of the round die there are four holes and a groove which are used to fix the die in suitable die holder and holders by means of retaining screws

10 mm 5 pcs

315 Nominal diameter in mm 8 Pitch 1

Suitable for through-hole and blind-hole threads

35 mm P (depth) The thread insert must sit 1/4 - 1/2 turns below the surface B (thread depth with chamfer) 6

525 Pitch 24 Pitch in mm 1