Silicone Reducing Hump Hose 4" ID to 3-1/2" ID X 4" Long Gloss Black

Silicone Reducing Hump Hose 4" ID to 3-1/2" ID X 4" Long Gloss BlackThis silicone reducing hump hose is ideal in applications where you need a little "flex", such as between the air cleaner and the engine, or between the engine and the charge air cooler. Our silicone hump hoses have radiused corners inside the hose at the hump, for less turbulence. No sharp edges inside the hose. Temp rated to 350F. Recommended clamps are 94100 0388 on the small end and 94100 0438 on the big end.

Navistar / International 439311C1

5" OD tubes and you need to make a 90-degree bend

Special tight-weave aramid reinforcement can handles more pressure and last longer than other brands

Notes: The ends of the 3

This 90 degree silicone elbow is 4" ID and can be used anyplace you need a 90-degree bend

This 4-1/2" silicone coupler is 4 inches long

This reducing hump hose connects 5

Recommended clamps are 94100-0650 on the small end and 94100-0750 on the big end

Recommended clamps are CT400 on the small end and CT450 on the big end

Navistar/International 3675957C1

This reducing 90-degree intake elbow can be used any place where you are connecting a 5

This spring-loaded T-bolt clamp is used on 3" ID (5-ply) silicone hoses